Muc-Off - kit Tubeless bicicleta Ultimate Road Gravel setup kit CX - 44mm

Description

A kit complete with every essential needed to join the tubeless revolution. Five different kits for all kinds of bikes.Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset. complete setup kit contains sealant tape & valves for mtb/road/ gravel See it in action Going tubeless? Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you'll need to make the switch.Just make sure you've got tubeless ready wheels and tyres! If you're not sure, reach out to us on Live Chat!Everything you need in one handy kitIncludes a pair of our black Tubeless ValvesAvailable in a range of sizes to cater for all disciplines DescriptionThe Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll.Each Kit contains a Muc-Off Tubeless Rim Tape, Seal Patches, 2 CNC-machined black tubeless Valves and 2 pouches of No Puncture Hassle Tubeless Sealant.Our kit options:Road (21MM TAPE / 44MM VALVES)Road (21MM TAPE / 60MM VALVES)XC/Gravel (25MM TAPE / 44MM VALVES)DH/Trail/Enduro (30MM TAPE / 44MM VALVES)DH/PLUS (35MM TAPE / 44MM VALVES)HOW TO USE ?Remove all old rim strip or tape and clean rim.Make sure the rim is clean and dry before applying tape.Get the tape from the packet and line it up from the opposite side of the valve.Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.Continue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.Continue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)Overlap the tape by roughly 10 – 15cmLeave a small amount unstuck so that you can cut the remainder offOnce cut sketch and pull the tape down to create a sealGo around the rim with your thumb to make sure there is no air pockets or messed areas.Once your happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valveGrab your tubeless valve and remove the lock ring and o ringChose the right rubber fitment for your rim tape and insert valve into rimRefit O-ring and Lock ring making sure you lock the valve in (don’t go to tight or could damage the rubber)Re-fit your tyre of choice carful not to damage the tape (by using tyre levers ect)Inflate tyre to create a fit (should hear some popping around the rim)Release Air and remove valve core using the spare valve capGrab the sealant pouch and give it a shakeUnscrew the cap and fit on the valve in a up right positionWhile holding the pouch spin the wheel downward so that the pouch is now upside downInsert the sealant by rolling the pouch downSpin wheel back up right and remove pouchReinsert valve core and inflate to your pressureWhat's included?1x 10m roll of Tubeless Rim Tape (enough for two rims!)2x Seal Patches2x Black Tubeless Valves2x Valve caps2x Locking nuts1x Valve core removal tool (doubles as a spare valve cap)3 x Pairs of rubber bases for size choice2x Pouches of No Puncture Hassle Tubeless SealantEverything needed to get set up and ready to rollOur Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset.Wide range of sizes availableKits available for road, gravel and CX to enduro, trail and downhill.